Showing 1–12 of 19 results

Show sidebar
Sýna 9 24 36

Skálajárn 1/2″ M42

33.890 kr.

The M42 HSS material takes these tools to new heights of performance - significantly improving the hardness and wear resistance characteristics with superb edge sharpness. The edge staying sharper for longer making the visits to the grinder less frequent.

  • Hardened to 65/67 HRC and triple tempered to give the optimum performance without becoming too brittle.
  • All come with a 45 degree fingernail grind and a secondary bevel to aid control and off-tool finish.
  • Sharpened and honed for you to use straight away.
  • Easily identified by the ergonomic ash handle fitted with a red powder coated brass ferrule. 
  • Made in Sheffield, England. 
Setja í körfu

Skálajárn 3/4″ Crown tool

33.460 kr.
Milled from round bar. Every bowl gouge is finely turned for making the best of turned bowls, for heavy profile cuts or delicate feather cuts.

Framleitt úr M2 stálteini
Setja í körfu

Spindiljárn 1,25″ CT

32.990 kr.

Spindle gouges are used for detailed shaping between centres on parallel grain, particularly for concave curves.  These spindle gouges can be used to create beads, coves and other profiles on vases, goblets, candle sticks and more shaped work.  


Setja í körfu

Skálajárn 5/8″

29.460 kr.

Milled from round bar, these bowl gouges are created for making the best of turned bowls, for heavy profile cuts or for delicate feather cuts.


Setja í körfu

Skálajárn 3/8″ M42

28.590 kr.

The M42 HSS material takes these tools to new heights of performance - significantly improving the hardness and wear resistance characteristics with superb edge sharpness. The edge staying sharper for longer making the visits to the grinder less frequent.

  • Hardened to 65/67 HRC and triple tempered to give the optimum performance without becoming too brittle.
  • All come with a 45 degree fingernail grind and a secondary bevel to aid control and off-tool finish.
  • Sharpened and honed for you to use straight away.
  • Easily identified by the ergonomic ash handle fitted with a red powder coated brass ferrule. 
  • Made in Sheffield, England. 
Setja í körfu

Spindiljárn 1″ CT

27.990 kr.

Spindle gouges are used for detailed shaping between centres on parallel grain, particularly for concave curves.  These spindle gouges can be used to create beads, coves and other profiles on vases, goblets, candle sticks and more shaped work.  


Setja í körfu

Skálajárn 1/2″ finger

24.870 kr.

The fingernail shape of this gouge increases flexibility allowing the turner to perform 'pull cuts' without catching the lathe bed. The greater cutting area can be used equally well for heavy profiling cuts or fine, delicate shearing cuts. Easily maintained using the Robert Sorby ProEdge sharpening system.

Setja í körfu

Skálajárn 1/2″ Crown tool

23.480 kr.
Milled from round bar. Every bowl gouge is finely turned for making the best of turned bowls, for heavy profile cuts or delicate feather cuts.

Made from M2 steel
Setja í körfu

Rifjárn 1,25tomma CT

21.240 kr.
These roughing gouges are used for taking the corners off uneven and square stock, leaving it round and ready for further turning. They will also make initial shaping cuts removing waste quickly and efficiently.
Setja í körfu

Spindle gouge 25mm

20.890 kr.

Spindle gouges are used for detailed shaping between centres on parallel grain, particularly for concave curves.  These spindle gouges can be used to create beads, coves and other profiles on vases, goblets, candle sticks and more shaped work.  


Setja í körfu

Skála Rennijárn: 13mm

20.706 kr.
Crown Cryo járn fyrir betri endingu. Skefti úr svörtum aski með silfur millistykki. Járn með gott jafnvægi.
Setja í körfu

Skálajárn 3/8″

19.990 kr.

Milled from round bar, these bowl gouges are created for making the best of turned bowls, for heavy profile cuts or for delicate feather cuts.

Setja í körfu