Útiljós Xsolar LH-N Steinel
Tomorrow's formula for illuminated house numbers. The most advanced, most efficient and most attractive answer to providing the entrance to your home with an automatically illuminated house number. An integrated photo-cell controller switches the light on when darkness falls and off again when the sun rises.
Technical Data:
Dimensions (h x w x d): 227 x 242 x 51 mm
Power supply: Solar, no mains power required
Sensor type: photo-cell controller
Output: 0.03 W
Colour temperature: 4000 K / SDCM 5
Colour rendering: Ra = 80
LED life expectancy: 50,000 h (L70B10 to LM80)
LED cooling system: Passive Thermo Control
Twilight setting: 2 lx
IP rating: IP44
Protection class: III
Material: UV-resistant plastic,stainless-steel trim (on stainless-steel version)
Temperature range: - 20 to +40°C
With lamp: STEINEL LED system
Silfurleir námskeið
Skálajárn 5/8″
Skafa HeavyDuty 1,5″ Bogodd
Skafa HeavyDuty 1,5″ Þverodd
Helle Hnífur: Fjellkniven
Undirsink-Greinaydd Stór
Hitabyssa HL2020 E CASE
- he HL 2020 E hot air tool is extremely robust and lasts a good 20% longer than its predecessor. Delivery in carboard box
- With impressive 2200 Watt of power you can adjust the temperature from 80 °C to 630 °C in 10 °C step by joystick
- The residual heat indicator warns the user that the delivery nozzle is still hot even long after the tool has been unplugged
- Depending on the workpiece there are two temperature settings to choose from: 300 ° and 500 °C
- The airflow rate of the heat gun is adjustable in three stages (150 / 150-300 / 300-500 l/min.)
- The tool immediately responds to heat build-up by indicating a warning triangle on the display
- The HL 2020 is the perfect hot air tool for shaping, desoldering printed circuit boards, welding plastics, drying filler, shrinking on cable sleeves, soldering pipes and other jobs
Bandsagarblöð: 5stk.2.490mm
Spindiljárn 1″ CT
Flexcut útskurðarsett 4stk. Micro
Lófajárnasett 4 stk. í trékassa
Flexcut útskurðarhnífar eru fullbrýndir og póleraðir og renna því vel í gegnum útskurðarvið.
Annálaðir gæðahnífar, falla vel í lófann, eru léttur og mjög auðvelt að viðhalda bitinu. Mælum með slípimassann og brýnslusettið nr. PW12
Designed for extreme detail used in netsuke or caricature carving. These tools have their edges forged down even thinner than our other palm tools. Cutting with these fine edges allows the carver to work extremely close to adjacent detail without crushing wood fibers that can lead to "chipping out."
