Showing 661–672 of 3103 results

Show sidebar
Sýna 9 24 36

GRS hilla stór og festing (sett)

25.054 kr.
 

Recommended for use with the Positioning Vise or any vise used with the Turntable Base.

With the Adjustable Bracket, this shelf has height adjustability of 127 mm.

178 × 209.5 × 178 mm.

Setja í körfu

Verkfærapressa 1/2 TON

24.980 kr.
  • Hand operated; applies firm and uniform pressure
  • Useful for assembling brass tubes into wooden pen blanks
  • 114mm travel;19mm square arbor; 0.5 Tonne rating
Setja í körfu

raspa/þjalasett Bacho 5stk.

24.963 kr.

Key Features

  • Highly useful set in any workshop for innumerable tasks
  • All files are fitted with comfort grip handles
  • Supplied with storage wallet
Setja í körfu

Helle Fossakallen HNÍFUR

24.950 kr.

Fossekallen is named after Norway’s ”national” bird.

The knife is well shaped for all around use. The blade is made of triple laminated stainless steel. The knife comes with a snap type leather sheath.

Setja í körfu

Helle Hnífur: Steinbit

24.950 kr.
Frá Helle í Noregi - Vandaður flökunar hnífur úr Sandvik 12C27 rústfríu stáli - Kemur í leðurslíðri - Blaðlengd: 153mm - Blaðþykkt: 1,6mm - Þyngd: 90gr - Skepti: Birki.
Setja í körfu

Artclay verkfærasett

24.892 kr.

Separate tools must be used for the 3 different products, as Silver, Copper and bronze must not be mixed, as it damages the materials during firing. If the same tool is used, it must be cleaned thoroughly so that all dust and debris are removed before use.

Setja í körfu

Skálajárn 1/2″ finger

24.870 kr.

The fingernail shape of this gouge increases flexibility allowing the turner to perform 'pull cuts' without catching the lathe bed. The greater cutting area can be used equally well for heavy profiling cuts or fine, delicate shearing cuts. Easily maintained using the Robert Sorby ProEdge sharpening system.

Setja í körfu

UJK parf repeat stop

24.850 kr.

Key Features

  • Enables repeat length cuts on an MFT/3, MW1000 or UJK Multifunction Workbench
  • Perfect for other 20mm hole pattern workbenches
  • Supplied with two fixing posts which can also be used as bench dogs
  • Sliding bar range is 96mm
  • Made predominantly from stainless steel
Setja í körfu

Pocket hole kit MINI

24.850 kr.
  • Speeds up the making of a pocket hole joint
  • Two tough injection-moulded mini jigs link together
  • Unique modular design with hardened steel guide bushes
Setja í körfu

Pfeil útskurðarsett: 4stk.

24.850 kr.
Byrjendasett með þrem járnum og fleygskurðarhníf. Eitt V járn, eitt U járn og eitt beint.
Setja í körfu

Proxxon Skrúfstykki: Primus 100

24.825 kr.
Frá Proxxon Þýskalandi - Góð skrúfstykki til að nota með standborvélum - Breidd kjafta: 100mm - Kjaftar opnast: 75mm - Þyngd: 5kg. Sjá nánar frá framleiðanda:
Setja í körfu

Mini hefill Trimming

24.813 kr.
These slender pocket-size planes allow fine, controlled cuts in areas you could ordinarily trim only with a chisel. With very
Setja í körfu