Vörur
Flexcut Lófa Útskurðarsett: 5stk
Skálajárn 1/2″ M42
The M42 HSS material takes these tools to new heights of performance - significantly improving the hardness and wear resistance characteristics with superb edge sharpness. The edge staying sharper for longer making the visits to the grinder less frequent.
- Hardened to 65/67 HRC and triple tempered to give the optimum performance without becoming too brittle.
- All come with a 45 degree fingernail grind and a secondary bevel to aid control and off-tool finish.
- Sharpened and honed for you to use straight away.
- Easily identified by the ergonomic ash handle fitted with a red powder coated brass ferrule.
- Made in Sheffield, England.
Tálgusett 3stk hnífar
Set of 2 wood carving tools is used in spoon, bowl, cup, lovespoon and kuksa wood carving. Wood carving tools kit consists of 2 tools: hook knife 25mm diameter with sharp end and whittling knife with 58mm blade length. Tools arrived sharpened and ready to use right from the package. Wood spoon blank is included as a gift. This sets excellent fits both for beginners and professionals. Quality control is carried on every stage of the production process.
UJK vinkill/marker 250mm
Key Features
- Pivot point allows you to mark angles between 10 – 90°
- Internal and external scale ensure marking is simple
- Accuracy of square conforms to DIN 875 Grade 00. Calibration certificate inc.
- Tapered marking holes every 5mm fits common pencil angle
- Made entirely at our in-house manufacturing facility in Axminster, UK
- A level of accuracy unmatched by any other standard woodworker’s square
- Use as a scribing tool
- Butts at different thicknesses; easy to mark centres of common sheet material
- Bevel on the hypotenuse for easier read of angle marks
- Two internal marking radii to assist in the marking & removal of sharp corners
Titebond III Ultimate 8L
- Superior strength, strong initial tack, longer open assembly time
- Designed for interior and exterior applications
- Waterproof formula that cleans up with water
- Wood glue also suitable for cloth, leather etc
- Initial Tack time 30 mins
- Setting time 24 hours approximately
- Passes ANSI/HPVA Type I water-resistance
- Lower application temperature
- Unaffected by finishes
- FDA approved for indirect food contact
- Conforms to ASTM D-4236
Helle Jegermester HNÍFUR
GRS festisett 30stk.
With a variety of pins that fit the upper jaw plates of every GRS Block, users can now instantly solve workholding problems and start working sooner. Includes 4 one-half Thermo-Loc sticks, 8 small pins, 4 flat square pins, 2 rectangular inset-curve pins, 4 thick round inset pins, 8 rubber-coated pins, and 2 leather-faced ring clamp pins in moulded base.
Skálajárn 3/4″ Crown tool
Laguna 16-32 Sander In / Out Feed Foldin
