Vörulýsing
| Distance Between Centres | 762 mm or 1,262 mm with bed extension |
|---|---|
| Headstock Taper | 2 MT |
| Max Diameter | 900 mm using bed extension mounted on stand |
| Max Diameter over Bed | 508 mm |
| Model | AT508WL |
| Nett Weight | 280 kg |
| Overall L x W x H | 1,850 mm (+ 520 mm with bed ext) x 560 mm (+ 330 mm with bed ext) x 1,230 mm |
| Power | 2.2 kW |
| Rating | Trade |
| Spindle Thread | T38 M33 x 3.5 mm |
| Tailstock Taper | 2 MT |
| Voltage | 230 V |
| Lathe Speed | 60 – 1,200 / 100 – 2,200 / 140 – 3,700 rpm (var) |
| Tool Post Diameter | 30 mm |
This is the largest in our Trade Series woodturning lathes. It has all the features a serious woodturner would need for almost any woodturning project, large or small. Made almost entirely in cast iron, with the bed being particularly wide and well braced. Cast iron stand legs are included, providing a stable platform for the lathe. Vibration is virtually undetectable due to the mass of cast iron employed in the construction.
Unusually, this lathe can be used with the bed either way around, this is because the extension bed can be mounted either on the end of the main bed to extend the distance between centres, on the stand to create a bigger turning diameter, or on a mounting plate machined onto the side of the bed. This allows bowl turning with the headstock rotated to suit. The headstock can be slid totally along the bed and swivelled through 360° with indexing stops every 45°.
The headstock spindle is driven through a 10-groove multi V belt with a choice of three ratios; this coupled with the variable speed function gives a very wide speed range of 60-3,700 rpm. A remote control box with a magnetic back can be placed wherever you want and allows easy control. A forward and reverse direction switch is also fitted. The spindle has 24 indexing positions, held by a threaded stop pin. A separate spindle locking pin is provided, with a handy magnetic base.
The tailstock has an exceptionally long ram travel of 135mm, is etched with a scale and is unusually fitted with a digital readout, useful for precision hole boring. A long cam clamp lever locks the tailstock firmly in place and is easy to adjust. The tool rest holder has a wide base with an offset stem socket for increased rigidity. Two tool rests are provided, 150 and 300mm.
This is a top quality, fully featured lathe for the serious woodturner. With this machine in your workshop there would be very few woodturning projects you could not undertake.
Although a bed extension is included, you can purchase an extra bed extension, 104745.
N.B. The distance between centres will vary and depend on the type of centres or accessories used.
This machine was previously known as the AT2030VS
Umsagnir
Það eru engar umsagnir komnar ennþá.