A well designed and built 4 function machine offering all the performance and capacities that the keen home woodworker requires.
This machine is built around a rugged steel chassis with all cast iron tables, ground to a fine finish, with quite a bit of thought given to making each function easy to use. The 250mm diameter TCT saw blade offers 65mm maximum depth of cut and features a scoring blade for coated boards. The smooth running 1,200 x 120mm aluminium sliding table is fitted with a crosscut frame that can be positioned where required along the table plus a fence rail that extends out to 2,000mm. The sliding table is adjustable for height and parallel running to the blade. A work clamp and board edge shoe are provided. The rip fence is made of deep section aluminium extrusion and has a micro adjustment facility.
A 100mm dust outlet with a crown guard extraction point is fitted. The spindle moulder has 3 speeds and has a 30mm spindle with a travel of 130mm and a maximum tooling diameter of 140mm. The spindle cutter guards have large alloy fences, adjustable for depth of cut and cutter slot gap. Sprung hold down clamps are also provided. A 100mm chip outlet allows good extraction with a suitable extractor.
The planer/thicknesser offers 250mm surfacing and 250mm x 180mm thicknessing capacities. The planing tables are 1,050mm long and hinge out of the way for the thicknessing function. Excellent chip extraction is provided for with a pivoting extraction chute with a 100mm outlet. A separate control lever operates the feed rollers giving a feed speed of 8m/min, this coupled with the 3 bladed cutter block gives a very clean finish to the work.
A simple-to-use switching system controls each function in a safe manner with separate emergency stops and main circuit NVR protection. A mobility kit is provided to make it easy to move this machine around the workshop. This is an excellent machine for those whose workshops are tight for space and it presents very few of the compromises that some combination machines suffer from.
Motors: 3.0 kW (Saw) 2.0 kW ( Planer) 3.0 kW (Spindle). N.B. 16A supply required.
|Blade Diameter||250 mm|
|Blade Tilt||0° to 45°|
|Cuts per Minute||12,000|
|Cutterblock Diameter||75 mm|
|Cutterblock Speed||4,000 rpm|
|Dust Extraction Outlet||100 mm 3 x|
|Feed Speed||8 m/min|
|Knives||HSS (Resharpenable) x 3|
|Max Depth of Cut Planer||2.5 mm|
|Max Depth of Cut Thicknesser||3.0 mm|
|Max Planing Width||250 mm|
|Max Ripping Width||460 mm|
|Max Thicknessing Capacity||180 mm|
|Max Tooling Diameter Above Table||140 mm|
|Min Extraction Airflow Required||1,000 m³/hr|
|Nett Weight||370 kg|
|Number of Knives||3|
|Number of Motors||3|
|Scoring Blade Bore||20 mm|
|Scoring Blade Diameter||80 mm|
|Scoring Blade Speed||6,300 rpm|
|Spindle Diameter||30 mm|
|Spindle Speed||3,500, 5,500 & 7,500 rpm|
|Table Size||1,200 mm x 840 mm (Saw) 250 mm x 1,050 mm (Planer) 250 mm x 600 mm (Thicknesser)|
|Plug Fitted||UK 3 pin plug|
|Max Depth of Cut @ 45º||45 mm|
|Max Depth of Cut @ 90º||65 mm|