Karfan þín er tóm.
 

Axminster Sambyggð Trésmíðavél: AWC4

Yfirlit

Frá Axminster Englandi kemur þessi skemmtilega sambyggða vél. Möguleikar: Sög - Þykktarhefill - Planari og Spindlagerð - Aðalsög: 250mm - Sagarblað: 80mm - Þrír hraðar á spindilnum - Þrír sjálfstæðir mótorar.
Vara: 700362



Flokkur: Vélar
Vörumerki Axminster
Verðbil 500+ Þúsund
Áhugasvið Trésmíði
Nýtt
Sett-Lausnir -
Verð: 823.000 Kr.
Á lager: 999


Axminster AWC4 250mm DeLuxe Combination Machine

  • 4 function machine: sawing, spindle moulding, surface planing and thicknessing
  • 3 independent motors
  • 250mm diameter main saw with 80mm scoring blade
  • 3 blade planer/thicknessing block
  • 3 speed spindle moulder function
  • All cast iron tables, cast iron fence for surfacing
  • Saw rip fence with micro adjustment facility

A well designed and built 4 function machine offering all the performance and capacities that the home or light trade workshop requires. Built around a rugged steel chassis with all cast iron tables, ground to a fine finish, with quite a bit of thought given to making each function easy to use. The 250mm diameter TCT saw blade offers 65mm maximum depth of cut and features a scoring blade for coated boards. The smooth running 1,200 x 120mm aluminium sliding table is fitted with a cross cut frame that can be positioned where required along the table plus a fence rail that extends out to 2,000mm. The sliding table is adjustable for height and parallel running to the blade. A work clamp and board edge shoe are provided. A 100mm dust outlet with a crown guard extraction point is fitted. The spindle moulder has 3 speeds and has a 30mm spindle with a travel of 130mm and a maximum tooling diameter of 140mm. The spindle cutter guards have large alloy fences, adjustable for depth of cut and cutter slot gap. Sprung hold down clamps are also provided. A 100mm chip outlet allows good extraction with a suitable extractor. The planer/thicknesser offers 250mm surfacing and 250mm x 180mm thicknessing capacities. The planing tables are 1,050mm long and hinge out of the way for the thicknessing function. Excellent chip extraction is provided for with a pivoting extraction chute with a 100mm outlet. A separate control lever operates the feed rollers giving a feed speed of 8m/min, this coupled with the three bladed cutter block gives a very clean finish to the work. A simple to use switching system controls each function in a safe manner with separate emergency stops and main circuit NVR protection. This is an excellent machine for those whose workshops are tight for space and it presents very few of the compromises that some combination machines suffer from. N.B. 16A supply required.